feat: Split firmware into Bee (L2 transport) and Bumblebee (L3 gateway) roles

Bee (wr3000, ar300m16): minimal batman-adv mesh relay with gw_mode=client,
no yggdrasil/GRE6/VPN/SQM/DoH, Parahub_Free bridged to private network.
Bumblebee (axt1800, mt3000, mt6000, ax6s, ax53u): full stack with
gw_mode=server, yggdrasil overlay, GRE6 tunnel, guest isolation, SQM, DoH.

Build creates /etc/parahub/role marker; heartbeat reports firmware_role
and mesh_ip; Bee uses public URL, Bumblebee tries yggdrasil with fallback.

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

files/etc/uci-defaults/99-parahub-mesh

@@ -2,9 +2,16 @@
 # Parahub Mesh Node — Zero-Touch First Boot Configuration
 # This script runs once on first boot via uci-defaults mechanism.
 # It configures: batman-adv mesh, dual-band WiFi (private+public), firewall zones, SQM shaping.
+#
+# Roles:
+#   bumblebee (L3 Gateway) — full stack: yggdrasil, GRE6, VPN, guest isolation, SQM, DoH
+#   bee (L2 Transport)     — minimal: batman-adv mesh relay, heartbeat
 
 set -e
 
+# Read firmware role (written by build.sh)
+ROLE=$(cat /etc/parahub/role 2>/dev/null || echo "bumblebee")
+
 # ============================================================================
 # 1. IDENTITY GENERATION
 # ============================================================================
@@ -55,6 +62,7 @@ mkdir -p /etc/parahub
 cat > /etc/parahub/keys <<KEYS_EOF
 # Parahub Mesh Node Keys — Generated at first boot
 # Node: ${HOSTNAME}
+# Role: ${ROLE}
 # Date: $(date -u +%Y-%m-%dT%H:%M:%SZ)
 PRIVATE_WIFI_KEY=${PRIVATE_KEY}
 MESH_SAE_KEY=${MESH_KEY}
@@ -69,7 +77,8 @@ chmod 600 /etc/parahub/keys
 # 4. NETWORK CONFIGURATION
 # ============================================================================
 
-# Clean existing network config (preserve wan)
+if [ "$ROLE" = "bee" ]; then
+    # --- Bee: minimal network (bat0 gw_mode=client, no GRE6, no guest, no policy routing) ---
     uci batch <<-NET_EOF
 # --- loopback ---
 set network.loopback=interface
@@ -78,14 +87,65 @@ set network.loopback.proto='static'
 set network.loopback.ipaddr='127.0.0.1'
 set network.loopback.netmask='255.0.0.0'
 
-# --- bat0 (batman-adv virtual interface) ---
+# --- bat0 (batman-adv, client mode — uses Bumblebee as gateway) ---
 set network.bat0=interface
 set network.bat0.proto='batadv'
 set network.bat0.routing_algo='BATMAN_V'
 set network.bat0.aggregated_ogms='1'
 set network.bat0.bridge_loop_avoidance='1'
 set network.bat0.distributed_arp_table='1'
-set network.bat0.gw_mode='off'
+set network.bat0.gw_mode='client'
+set network.bat0.hop_penalty='15'
+set network.bat0.orig_interval='1000'
+
+# --- bat0 hardif for mesh0 (2.4GHz mesh) ---
+set network.bat0_hardif_mesh0=interface
+set network.bat0_hardif_mesh0.proto='batadv_hardif'
+set network.bat0_hardif_mesh0.master='bat0'
+
+# --- bat0 hardif for mesh1 (5GHz mesh) ---
+set network.bat0_hardif_mesh1=interface
+set network.bat0_hardif_mesh1.proto='batadv_hardif'
+set network.bat0_hardif_mesh1.master='bat0'
+
+# --- private bridge (bat0 + LAN ethernet) ---
+set network.private_dev=device
+set network.private_dev.type='bridge'
+set network.private_dev.name='br-private'
+delete network.private_dev.ports
+add_list network.private_dev.ports='bat0'
+add_list network.private_dev.ports='eth0'
+
+set network.private=interface
+set network.private.device='br-private'
+set network.private.proto='static'
+set network.private.ipaddr='${PRIV_IP}'
+set network.private.netmask='255.255.255.0'
+
+# --- wan (DHCP, create if missing) ---
+set network.wan=interface
+set network.wan.device='eth1'
+set network.wan.proto='dhcp'
+NET_EOF
+
+else
+    # --- Bumblebee: full network (gw_mode=server, GRE6, guest, policy routing) ---
+    uci batch <<-NET_EOF
+# --- loopback ---
+set network.loopback=interface
+set network.loopback.device='lo'
+set network.loopback.proto='static'
+set network.loopback.ipaddr='127.0.0.1'
+set network.loopback.netmask='255.0.0.0'
+
+# --- bat0 (batman-adv, server mode — acts as gateway for Bee nodes) ---
+set network.bat0=interface
+set network.bat0.proto='batadv'
+set network.bat0.routing_algo='BATMAN_V'
+set network.bat0.aggregated_ogms='1'
+set network.bat0.bridge_loop_avoidance='1'
+set network.bat0.distributed_arp_table='1'
+set network.bat0.gw_mode='server'
 set network.bat0.hop_penalty='15'
 set network.bat0.orig_interval='1000'
 
@@ -140,6 +200,8 @@ set network.@rule[-1].src='${GUEST_SUBNET}/24'
 set network.@rule[-1].lookup='100'
 set network.@rule[-1].priority='100'
 NET_EOF
+fi
+
 uci commit network
 
 # ============================================================================
@@ -202,8 +264,19 @@ set wireless.mesh_2g.key='${MESH_KEY}'
 set wireless.mesh_2g.network='bat0_hardif_mesh0'
 WIFI_2G_MESH
 
-    # Public AP on 2.4GHz (better range) — OWE transition mode
+    if [ "$ROLE" = "bee" ]; then
-    # Devices that support OWE get encrypted; legacy devices fall back to open
+        # Bee: Parahub_Free on private bridge (no guest isolation)
+        uci batch <<-WIFI_2G_PUB
+set wireless.public_2g=wifi-iface
+set wireless.public_2g.device='${RADIO_2G}'
+set wireless.public_2g.mode='ap'
+set wireless.public_2g.ssid='${PUBLIC_SSID}'
+set wireless.public_2g.encryption='owe'
+set wireless.public_2g.owe_transition='1'
+set wireless.public_2g.network='private'
+WIFI_2G_PUB
+    else
+        # Bumblebee: Parahub_Free on guest network (isolated)
         uci batch <<-WIFI_2G_PUB
 set wireless.public_2g=wifi-iface
 set wireless.public_2g.device='${RADIO_2G}'
@@ -215,6 +288,7 @@ set wireless.public_2g.isolate='1'
 set wireless.public_2g.network='guest'
 WIFI_2G_PUB
     fi
+fi
 
 # --- 5GHz radio: mesh backhaul + Private AP ---
 if [ -n "$RADIO_5G" ]; then
@@ -254,6 +328,51 @@ while uci -q delete firewall.@forwarding[0]; do :; done
 while uci -q delete firewall.@rule[0]; do :; done
 while uci -q delete firewall.@redirect[0]; do :; done
 
+if [ "$ROLE" = "bee" ]; then
+    # --- Bee: minimal firewall (lan + wan only) ---
+    uci batch <<-FW_EOF
+# --- Zone: lan (private network) ---
+add firewall zone
+set firewall.@zone[-1].name='lan'
+set firewall.@zone[-1].input='ACCEPT'
+set firewall.@zone[-1].output='ACCEPT'
+set firewall.@zone[-1].forward='ACCEPT'
+add_list firewall.@zone[-1].network='private'
+
+# --- Zone: wan ---
+add firewall zone
+set firewall.@zone[-1].name='wan'
+set firewall.@zone[-1].input='REJECT'
+set firewall.@zone[-1].output='ACCEPT'
+set firewall.@zone[-1].forward='REJECT'
+set firewall.@zone[-1].masq='1'
+set firewall.@zone[-1].mtu_fix='1'
+add_list firewall.@zone[-1].network='wan'
+
+# --- Forwarding: lan → wan ---
+add firewall forwarding
+set firewall.@forwarding[-1].src='lan'
+set firewall.@forwarding[-1].dest='wan'
+
+# --- Standard WAN input rules ---
+add firewall rule
+set firewall.@rule[-1].name='Allow-DHCP-Renew'
+set firewall.@rule[-1].src='wan'
+set firewall.@rule[-1].proto='udp'
+set firewall.@rule[-1].dest_port='68'
+set firewall.@rule[-1].target='ACCEPT'
+set firewall.@rule[-1].family='ipv4'
+
+add firewall rule
+set firewall.@rule[-1].name='Allow-Ping'
+set firewall.@rule[-1].src='wan'
+set firewall.@rule[-1].proto='icmp'
+set firewall.@rule[-1].icmp_type='echo-request'
+set firewall.@rule[-1].target='ACCEPT'
+FW_EOF
+
+else
+    # --- Bumblebee: full firewall (4 zones, guest isolation, kill switch) ---
     uci batch <<-FW_EOF
 # --- Zone: lan (private network) ---
 add firewall zone
@@ -363,6 +482,8 @@ set firewall.@rule[-1].proto='icmp'
 set firewall.@rule[-1].icmp_type='echo-request'
 set firewall.@rule[-1].target='ACCEPT'
 FW_EOF
+fi
+
 uci commit firewall
 
 # ============================================================================
@@ -373,6 +494,17 @@ uci commit firewall
 uci -q delete dhcp.lan 2>/dev/null || true
 uci -q delete dhcp.guest 2>/dev/null || true
 
+if [ "$ROLE" = "bee" ]; then
+    # Bee: private DHCP only (no guest pool)
+    uci batch <<-DHCP_EOF
+set dhcp.private=dhcp
+set dhcp.private.interface='private'
+set dhcp.private.start='100'
+set dhcp.private.limit='150'
+set dhcp.private.leasetime='12h'
+DHCP_EOF
+else
+    # Bumblebee: private + guest DHCP
     uci batch <<-DHCP_EOF
 # --- Private DHCP ---
 set dhcp.private=dhcp
@@ -388,15 +520,15 @@ set dhcp.guest.start='100'
 set dhcp.guest.limit='50'
 set dhcp.guest.leasetime='1h'
 DHCP_EOF
+fi
+
 uci commit dhcp
 
 # ============================================================================
-# 8. SQM TRAFFIC SHAPING (guest 512 kbps limit)
+# 8. SQM TRAFFIC SHAPING (Bumblebee only — guest 512 kbps limit)
 # ============================================================================
 
-# Find the guest interface device name (will be set after network restart)
+if [ "$ROLE" != "bee" ]; then
-# SQM watches the interface name from the network config
-
     uci batch <<-SQM_EOF
 set sqm.guest=queue
 set sqm.guest.enabled='1'
@@ -409,13 +541,13 @@ set sqm.guest.linklayer='ethernet'
 set sqm.guest.overhead='44'
 SQM_EOF
     uci commit sqm
+fi
 
 # ============================================================================
-# 9. DNS-OVER-HTTPS (guest DNS privacy)
+# 9. DNS-OVER-HTTPS (Bumblebee only — guest DNS privacy)
 # ============================================================================
 
-# https-dns-proxy: local DoH resolver for guest DNS queries
+if [ "$ROLE" != "bee" ]; then
-# Guest DNS is hijacked via firewall redirect to this resolver
     uci batch <<-DOH_EOF
 set https-dns-proxy.main=main
 set https-dns-proxy.main.doh_paramters='-4'
@@ -437,6 +569,7 @@ uci commit dhcp
 
     # Enable https-dns-proxy service
     /etc/init.d/https-dns-proxy enable 2>/dev/null || true
+fi
 
 # ============================================================================
 # 10. SYSTEM SETTINGS
@@ -453,9 +586,10 @@ SYS_EOF
 uci commit system
 
 # ============================================================================
-# 11. YGGDRASIL OVERLAY NETWORK
+# 11. YGGDRASIL OVERLAY NETWORK (Bumblebee only)
 # ============================================================================
 
+if [ "$ROLE" != "bee" ]; then
     # Generate unique keys for this node
     yggdrasil -genconf | sed 's/IfName: .*/IfName: ygg0/' > /etc/yggdrasil.conf
 
@@ -480,6 +614,9 @@ uci commit firewall
     # Save yggdrasil address to node keys file
     YGG_ADDR=$(yggdrasil -address -useconffile /etc/yggdrasil.conf 2>/dev/null || echo "unknown")
     echo "YGGDRASIL_ADDRESS=${YGG_ADDR}" >> /etc/parahub/keys
+else
+    YGG_ADDR="none"
+fi
 
 # ============================================================================
 # 12. HEARTBEAT (phone-home to Parahub cloud)
@@ -496,13 +633,21 @@ echo "*/5 * * * * /usr/bin/parahub-heartbeat" >> /etc/crontabs/root
 # ============================================================================
 
 # Log completion
-logger -t parahub-mesh "First boot configuration complete"
+logger -t parahub-mesh "First boot configuration complete (role: ${ROLE})"
 logger -t parahub-mesh "Hostname: ${HOSTNAME}"
+logger -t parahub-mesh "Role: ${ROLE}"
 logger -t parahub-mesh "Private: ${PRIVATE_SSID} @ ${PRIV_IP}/24"
+
+if [ "$ROLE" = "bee" ]; then
+    logger -t parahub-mesh "Parahub_Free: bridged to private (no guest isolation)"
+    logger -t parahub-mesh "bat0 gw_mode: client (uses Bumblebee as gateway)"
+else
     logger -t parahub-mesh "Guest: ${PUBLIC_SSID} @ ${GUEST_IP}/24"
     logger -t parahub-mesh "Mesh ID: ${MESH_ID}"
     logger -t parahub-mesh "Yggdrasil: ${YGG_ADDR}"
     logger -t parahub-mesh "GRE tunnel: 172.16.0.2 → VPS gateway (Mullvad Portugal)"
     logger -t parahub-mesh "Kill switch: guest→vpn_tunnel only (no wan)"
+    logger -t parahub-mesh "bat0 gw_mode: server (gateway for Bee nodes)"
+fi
 
 exit 0

files/usr/bin/parahub-heartbeat

@@ -1,10 +1,11 @@
 #!/bin/sh
-# Phone-home heartbeat to Parahub cloud via Yggdrasil
+# Phone-home heartbeat to Parahub cloud
-PARAHUB_API="http://[200:abb9:5810:37d3:8a4c:98a6:b82b:969a]/api/v1/iot/mesh/heartbeat"
+PARAHUB_API_YGG="http://[200:abb9:5810:37d3:8a4c:98a6:b82b:969a]/api/v1/iot/mesh/heartbeat"
+PARAHUB_API_PUBLIC="https://parahub.io/api/v1/iot/mesh/heartbeat"
 HEARTBEAT_KEY="IqPosrcpTQKSbLHxOG3iLTl_K2MsDxvd"
 
-# Check Yggdrasil connectivity first
+# Read firmware role
-ping6 -c 1 -W 3 200:abb9:5810:37d3:8a4c:98a6:b82b:969a >/dev/null 2>&1 || exit 0
+ROLE=$(cat /etc/parahub/role 2>/dev/null || echo "unknown")
 
 # Read identity from /etc/parahub/keys
 . /etc/parahub/keys 2>/dev/null
@@ -14,18 +15,45 @@ YGG_ADDR="${YGGDRASIL_ADDRESS:-unknown}"
 SSID="${PRIVATE_SSID:-unknown}"
 UPTIME="$(cut -d. -f1 /proc/uptime)"
 
+# Get mesh IP (br-private address)
+MESH_IP=$(ip -4 addr show br-private 2>/dev/null | grep -o 'inet [0-9.]*' | cut -d' ' -f2)
+MESH_IP="${MESH_IP:-unknown}"
+
 # Detect hardware from board_name
 HW=$(cat /tmp/sysinfo/board_name 2>/dev/null)
 case "$HW" in
     glinet,gl-axt1800) HW="axt1800" ;;
     glinet,gl-mt3000) HW="mt3000" ;;
     glinet,gl-mt6000) HW="mt6000" ;;
+    xiaomi,redmi-router-ax6s) HW="ax6s" ;;
     asus,rt-ax53u) HW="ax53u" ;;
+    glinet,gl-ar300m16) HW="ar300m16" ;;
+    cudy,wr3000-v1) HW="wr3000" ;;
     *) HW="${HW:-unknown}" ;;
 esac
 
+PAYLOAD="{\"mac\":\"${MAC}\",\"hostname\":\"${HOSTNAME}\",\"yggdrasil_address\":\"${YGG_ADDR}\",\"firmware_version\":\"25.12.0-rc4\",\"hardware_profile\":\"${HW}\",\"uptime\":${UPTIME},\"private_ssid\":\"${SSID}\",\"firmware_role\":\"${ROLE}\",\"mesh_ip\":\"${MESH_IP}\"}"
+
+if [ "$ROLE" = "bee" ]; then
+    # Bee: no yggdrasil, use public URL only
     curl -s -m 10 -X POST \
         -H "Content-Type: application/json" \
         -H "Authorization: Bearer ${HEARTBEAT_KEY}" \
-    -d "{\"mac\":\"${MAC}\",\"hostname\":\"${HOSTNAME}\",\"yggdrasil_address\":\"${YGG_ADDR}\",\"firmware_version\":\"25.12.0-rc4\",\"hardware_profile\":\"${HW}\",\"uptime\":${UPTIME},\"private_ssid\":\"${SSID}\"}" \
+        -d "$PAYLOAD" \
-    "${PARAHUB_API}" >/dev/null 2>&1
+        "${PARAHUB_API_PUBLIC}" >/dev/null 2>&1
+else
+    # Bumblebee: try yggdrasil first, fallback to public
+    if ping6 -c 1 -W 3 200:abb9:5810:37d3:8a4c:98a6:b82b:969a >/dev/null 2>&1; then
+        curl -s -m 10 -X POST \
+            -H "Content-Type: application/json" \
+            -H "Authorization: Bearer ${HEARTBEAT_KEY}" \
+            -d "$PAYLOAD" \
+            "${PARAHUB_API_YGG}" >/dev/null 2>&1
+    else
+        curl -s -m 10 -X POST \
+            -H "Content-Type: application/json" \
+            -H "Authorization: Bearer ${HEARTBEAT_KEY}" \
+            -d "$PAYLOAD" \
+            "${PARAHUB_API_PUBLIC}" >/dev/null 2>&1
+    fi
+fi

scripts/build.sh

@@ -22,26 +22,37 @@ device_config() {
         axt1800)
             OPENWRT_TARGET="qualcommax/ipq60xx"
             PROFILE="glinet_gl-axt1800"
+            FIRMWARE_ROLE="bumblebee"
             ;;
         mt3000)
             OPENWRT_TARGET="mediatek/filogic"
             PROFILE="glinet_gl-mt3000"
+            FIRMWARE_ROLE="bumblebee"
             ;;
         mt6000)
             OPENWRT_TARGET="mediatek/filogic"
             PROFILE="glinet_gl-mt6000"
+            FIRMWARE_ROLE="bumblebee"
             ;;
         ax6s)
             OPENWRT_TARGET="mediatek/filogic"
             PROFILE="xiaomi_redmi-router-ax6s"
+            FIRMWARE_ROLE="bumblebee"
             ;;
         ax53u)
             OPENWRT_TARGET="ramips/mt7621"
             PROFILE="asus_rt-ax53u"
+            FIRMWARE_ROLE="bumblebee"
             ;;
         ar300m16)
             OPENWRT_TARGET="ath79/generic"
             PROFILE="glinet_gl-ar300m16"
+            FIRMWARE_ROLE="bee"
+            ;;
+        wr3000)
+            OPENWRT_TARGET="mediatek/filogic"
+            PROFILE="cudy_wr3000-v1"
+            FIRMWARE_ROLE="bee"
             ;;
         *)
             return 1
@@ -53,42 +64,32 @@ device_config() {
 # Packages
 # ============================================================================
 
-PACKAGES_CORE=(
+# Bee (L2 Transport): minimal mesh relay — no overlay, no guest isolation
-    # batman-adv mesh
+PACKAGES_BEE=(
     kmod-batman-adv
     batctl-full
-
-    # 802.11s mesh support (replace basic wpad, includes OWE)
     wpad-mesh-mbedtls
     -wpad-basic-mbedtls
+    luci
+    curl
+)
 
-    # Yggdrasil overlay network
+# Bumblebee (L3 Gateway): full stack — overlay, VPN, guest isolation, diagnostics
+PACKAGES_BUMBLEBEE=(
+    kmod-batman-adv
+    batctl-full
+    wpad-mesh-mbedtls
+    -wpad-basic-mbedtls
     yggdrasil
-
-    # GRE6 tunnel (guest traffic → VPS gateway)
     kmod-gre6
-
-    # WireGuard (optional local Mullvad via parahub-mullvad script)
     kmod-wireguard
     wireguard-tools
     luci-proto-wireguard
-
-    # DNS-over-HTTPS for guest privacy
     https-dns-proxy
-
-    # SQM traffic shaping
     sqm-scripts
     kmod-sched-cake
-
-    # Management
     luci
     luci-app-sqm
-)
-
-PACKAGES_FULL=(
-    "${PACKAGES_CORE[@]}"
-
-    # Diagnostics
     tcpdump
     iperf3
     iwinfo
@@ -102,13 +103,18 @@ PACKAGES_FULL=(
 usage() {
     echo "Usage: $0 <device>"
     echo ""
-    echo "Devices:"
+    echo "Devices:                                                          Role"
-    echo "  axt1800   GL.iNet GL-AXT1800 (Slate AX)    qualcommax/ipq60xx"
+    echo "  axt1800   GL.iNet GL-AXT1800 (Slate AX)    qualcommax/ipq60xx  Bumblebee"
-    echo "  mt3000    GL.iNet GL-MT3000 (Beryl AX)      mediatek/filogic"
+    echo "  mt3000    GL.iNet GL-MT3000 (Beryl AX)      mediatek/filogic   Bumblebee"
-    echo "  mt6000    GL.iNet GL-MT6000 (Flint 2)       mediatek/filogic"
+    echo "  mt6000    GL.iNet GL-MT6000 (Flint 2)       mediatek/filogic   Bumblebee"
-    echo "  ax6s      Xiaomi Redmi AX6S                 mediatek/filogic"
+    echo "  ax6s      Xiaomi Redmi AX6S                 mediatek/filogic   Bumblebee"
-    echo "  ax53u     Asus RT-AX53U                    ramips/mt7621"
+    echo "  ax53u     Asus RT-AX53U                    ramips/mt7621       Bumblebee"
-    echo "  ar300m16  GL.iNet GL-AR300M16-EXT (16MB)   ath79/generic"
+    echo "  ar300m16  GL.iNet GL-AR300M16-EXT (16MB)   ath79/generic       Bee"
+    echo "  wr3000    Cudy AX3000 (WR3000)              mediatek/filogic   Bee"
+    echo ""
+    echo "Roles:"
+    echo "  Bumblebee  L3 Gateway — full stack (yggdrasil, VPN, guest isolation, SQM, DoH)"
+    echo "  Bee        L2 Transport — minimal mesh relay (batman-adv, luci, heartbeat)"
     echo ""
     echo "OpenWrt version: ${OPENWRT_VERSION} (override with OPENWRT_VERSION env var)"
     echo ""
@@ -146,18 +152,35 @@ download_builder() {
 build_firmware() {
     local dir
     dir="$(builder_dir)"
-    local packages="${PACKAGES_FULL[*]} ${PACKAGES_EXTRA:-}"
+
+    # Select package list by role
+    local packages
+    if [ "$FIRMWARE_ROLE" = "bee" ]; then
+        packages="${PACKAGES_BEE[*]} ${PACKAGES_EXTRA:-}"
+    else
+        packages="${PACKAGES_BUMBLEBEE[*]} ${PACKAGES_EXTRA:-}"
+    fi
+
+    # Create temp FILES dir with role marker
+    local tmpfiles
+    tmpfiles=$(mktemp -d)
+    cp -a "${PROJECT_DIR}/files/"* "$tmpfiles/"
+    mkdir -p "$tmpfiles/etc/parahub"
+    echo "$FIRMWARE_ROLE" > "$tmpfiles/etc/parahub/role"
 
     echo "Building firmware for profile: ${PROFILE}"
+    echo "Role: ${FIRMWARE_ROLE}"
     echo "Packages: ${packages}"
-    echo "Custom files: ${PROJECT_DIR}/files"
+    echo "Custom files: ${tmpfiles}"
 
     make -C "$dir" image \
         PROFILE="$PROFILE" \
         PACKAGES="$packages" \
-        FILES="${PROJECT_DIR}/files" \
+        FILES="$tmpfiles" \
         BIN_DIR="${PROJECT_DIR}/output"
 
+    rm -rf "$tmpfiles"
+
     echo ""
     echo "Build complete! Firmware images:"
     ls -lh "${PROJECT_DIR}/output/"*.bin 2>/dev/null || true
@@ -183,6 +206,7 @@ fi
 
 echo "=== Parahub Mesh Firmware Builder ==="
 echo "Device:  ${INPUT}"
+echo "Role:    ${FIRMWARE_ROLE}"
 echo "OpenWrt: ${OPENWRT_VERSION}"
 echo "Target:  ${OPENWRT_TARGET}"
 echo "Profile: ${PROFILE}"